Details
Multipurpose tie for 1-1/8" plywood form systems RC-6 icon
Standard residential snap tie on one end--½” coil rod adapter on the other
Snaps off like normal tie
Low cost solution for one-sided forming and adjustable-length ties
Welded to rigorous standards using computer-controlled equipment: each RC is as strong as a standard wall tie
2500 lbs Safe Working Load (2-to-1 safety factor)
Adjustable-Length Ties
Make any-length ties at the job site
Use standard ½” coil rod and a pair of Resi-Coil Ties to create ties of any length with off-the-shelf components. Save time and set-up charges for custom-length ties.
Since RC’s are manufactured in a tightly-controlled process, you are assured of an adjustable long tie that is as strong as a standard tie (2500lbs SWL). Don’t take chances on field-welded ties or other make-do measures.
Ideal for :
Battered walls
Pilasters
Machine Bases
Unusual forming situations
Mass pours
Emergencies
One-Sided Forming
One-sided forming made easy
Resi-Coil Ties and short lengths of ½” coil rod allow you to quickly anchor forming panels onto existing structures. Use drop-in anchors, epoxy, or rock anchors to attach to concrete, rock, or masonry walls. Other standard ½” coil rod hardware (toggle bolts, plate washers and nuts, etc.) can be used to secure to sheet piling, plywood, or other materials.
The RC’s design simplifies the process of setting up forms for a one-sided wall. Since the tie is precisely in line with the coil rod, just drill holes at locations on the existing wall corresponding to tie locations on the forms.