Carbon Steel Power-Stud

Power-Stud    Wedge Expansion Anchor

Product Description :

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor.It is available in threaded, rod hanger and tie-wire versions suitable for applications in solidconcrete and grout-filled concrete masonry. The carbon steel threaded version is suitable fora variety of applications. The drill bit diameter necessary for proper installation is the sameas the anchor diameter.

General Applications and Uses :

Lighting Standards and Base Plates

Sills and Support Ledgers

Structural Anchorage

Retrofit Projects and Machinery Anchorage

Features and Benefits :
+ Fully threaded, heavy and medium duty all-purpose anchor
+ Nominal drill bit diameter same as anchor diameter (externally threaded version)
+ Length ID stamped on each threaded anchor
+ Anchors can be installed through the fixture, hole spotting not required
+ Chamfered impact section prevents damage to threads
+ Length of holes can be over-drilled or bottomless
+ Clip design prevents spinning during installation

Approvals and Listings :

Tested in accordance with ASTM E488 and AC01 criteriaFM Global (Factory Mutual) – File No. J.I. OK3A9.AH (see ordering information)Underwriters Laboratory (UL Listed) – File No. EX1289 (see ordering information)Federal GSA SpecificationMeets the descriptive and proof load requirements of CID A-A-1923A, Type 4 (threaded version)CalTrans listing for “Stud Mechanical Expansion Anchors”

Guide Specifications :

CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090-MetalFastenings. Expansion anchors shall be Power-Stud as supplied byPowers Fasteners, Inc., Brewster, NY.

Ordering Information :

Carbon Steel Power-Stud :

Cat. No.	Anchor Size	Min. Embed.	Thread Length	Std. Box	Std. Carton	Wt./100	FM or UL
7400	1/4" x 1 3/4"	1 1/8"	3/4"	100	500	3	-
7402	1/4" x 2 1/4"	1 1/8"	1 1/4"	100	500	3 1/2	-
7404	1/4" x 3 1/4"	1 1/8"	2 1/4"	100	500	4 3/4	-
7410	3/8" x 2 1/4"	1 5/8"	1 1/4"	50	250	8 3/4	FM/UL
7412	3/8" x 2 3/4"	1 5/8"	1 5/8"	50	250	9 1/2	FM/UL
7413	3/8" x 3"	1 5/8"	1 7/8"	50	250	10 3/4	FM/UL
7414	3/8" x 3 1/2"	1 5/8"	2 3/8"	50	250	12	FM/UL
7415	3/8" x 3 3/4"	1 5/8"	2 5/8"	50	250	12 3/4	FM/UL
7416	3/8" x 5"	1 5/8"	3 7/8"	50	250	15 1/2	FM/UL
7417	3/8" x 7"	1 5/8"	5 7/8"	50	200	21	FM/UL
7420	1/2" x 2 3/4"	2 1/4"	1 3/8"	50	200	18	FM/UL
7422	1/2' x 3 3/4"	2 1/4"	2 3/8"	50	200	23	FM/UL
7423	1/2" x 4 1/2"	2 1/4"	3 1/8"	50	200	28	FM/UL
7424	1/2" x 5 1/2"	2 1/4"	4 1/8"	50	150	32	FM/UL
7426	1/2" x 7"	2 1/4"	5 5/8"	25	100	44	FM/UL
7427	1/2" x 8 1/2"	2 1/4"	7 1/8"	25	100	46	FM/UL
7430	5/8" x 3 1/2"	2 3/4"	2"	25	100	40	FM/UL
7432	5/8" x 4 1/2"	2 3/4"	3"	25	100	54	FM/UL
7433	5/8" x 5"	2 3/4"	3 1/2"	25	100	57	FM/UL
7434	5/8" x 6"	2 3/4"	4 1/2"	25	75	64	FM/UL
7436	5/8" x 7"	2 3/4"	5 1/2"	25	75	72	FM/UL
7438	5/8" x 8 1/2"	2 3/4"	7"	25	75	84	FM/UL
7439	5/8" x 10"	2 3/4"	8 1/2"	25	75	100	UL
7440	3/4" x 4 1/4"	3 3/8"	2 3/8"	20	60	70	UL
7441	3/4" x 4 3/4"	3 3/8"	2 7/8"	20	60	76	UL
7442	3/4" x 5 1/2"	3 3/8"	3 5/8"	20	60	85	UL
7444	3/4" x 6 1/4"	3 3/8"	4 3/8"	20	60	95	UL
7446	3/4" x 7"	3 3/8"	5 1/8"	20	60	105	UL
7448	3/4" x 8 1/2"	3 3/8"	6 5/8"	10	40	120	UL
7449	3/4" x 10"	3 3/8"	8 1/8"	10	30	135	UL
7451	3/4" x 12"	3 3/8"	10 1/8"	10	30	155	UL
7450	7/8" x 6"	3 7/8"	2 3/4"	10	40	120	UL
7452	7/8" x 8"	3 7/8"	4 3/4"	10	40	160	UL
7454	7/8" x 10"	3 7/8"	6 3/4"	10	30	200	UL
7461	1" x 6"	4 1/2"	2 3/8"	10	30	170	UL
7463	1" x 9"	4 1/2"	5 3/8"	10	30	240	-
7465	1" x 12"	4 1/2"	8 3/8"	5	15	300	-
7473	1 1/4" x 9"	5 1/2"	4 3/4"	5	15	360	-
7475	1 1/4" x 12"	5 1/2"	7 3/4"	5	15	480	-

Rod Hanger Power-Stud :

Cat. No.	Rod Size	Anchor Size	Drill Dia.	Min. Embed.	Thread Depth	Std. Box	Std. Carton	Wt./100	FM or UL
7806	3/8"	1/2" x 2 3/8"	1/2"	2 1/4"	9/16"	50	250	18	FM/UL

Tie-Wire Power-Stud :

Cat. No.	Size	Tie-Wire Hole Size	Min. Embed.	Std. Box	Std. Carton	Wt./100	FM or UL
7409	1/4" x 2"	9/32"	1 1/8"	100	500	3 3/4	FM/UL

View Product Specification

Carbon Steel Version


Mechanically Galvanized and Stanless Steel Versions

View Product Profiles

Smith Performing Arts Center, Las Vegas, NV

Manufacturer: Anchors Powers DeWalt

For More Information on the Carbon Steel Power-Stud, [Click Here] to Link to Manufacturer Web Site