Details
Specification Conformance
Roadsaver 201 meets all requirements of ASTM D6690(AASHTO M324), Type II, "joint and Crack Sealants, Hot-Applied, for Concrete and Asphalt Pavements", (fromerly ASTM D3405 and AASHTO M301). Roadsaver 201 exceeds requirements of ASTM D6690(AASHTO 324), Type I,(formerly ASTM D1190, AASHTO M173), and Federal Specification SSS-164.
Technical Data
| Tests |
ASTM D6690(AASHTO M324)Type II Limits |
| Resilience, 77°F (25°C) |
60% min |
| Softening Point |
176°F (80°C) min. |
| Cone Penetration, 77°F (25°C) |
90 Max |
| Flow, 140°C (60°C) |
3 mm Max |
| Bond -20°F, 50% ext. |
Pass 3 cycles |
| Asphalt Compatibility |
Compatible |
| Maximum Heating Temperature |
400°F (204°C) |
| Minimum Application Temperature |
380°F (193°C) |
Installation
The unit weight of Crafco Roadsaver 201 is 9.3 lbs./gal. (1.12 kg/L) at 60°F (15.5°C). Prior to use, the user must read and
follow Installation Instructions for Roadsaver 201, Polyflex, Parking Lot Asphalt rubber products to verify proper product selection, heating methods, pavement preparation
procedures, application geometry, usage precautions and safety procedures. These instructions are provided with each pallet of product.