Details
Specification Conformance
RoadSaver 221 meets all requirement of ASTM D6690 (AASHTO M324), Type II,
“Joint and Crack Sealants, Hot-Applied, for Concrete and Asphalt Pavements”, (formerly ASTM D3405 and AASHTO M301). It also
exceeds requirements of ASTM D6690 (AASHTO M324), Type I, (formerly ASTM D1190, AASHTO M173), and Federal Specification
SS-S-164.
Test |
ASTM D6690 (AASHTO M324)Type II Spec. Limits |
Cone Penetration |
90 max. |
Flow |
3mm max. |
Softening Point |
176°F (80°C) min. |
Resilience |
60% min. |
Bond, -20°F (-29°C), 50% ext. |
Pass 3 cycles |
Asphalt Compatibility |
Compatible |
Minimum Application Temperature |
380°F (193°C) |
Maximum Heating Temperature |
400°F (204°C) |
Installation
The specific gravity of Crafco RoadSaver 221 is 1.26 at 60°F. Prior to use, the user must read and follow
Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product
selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. These
instructions are provided with each pallet of product.