Details
Using Flow Control
USE:
With Rapid Set Mortar Mix (55-lb. bag), Grout (55-lb. bag), Concrete (60-lb. bag), and DOT Repair Mix (55-lb. bag), use 1 to 4 packets of FLOW Control to increase fluidity, and/or increase strengths to satisfy jobsite requirements. A trial batch is recommended to fine-tune the dosage. FLOW Control may be used in combination with all other products of the Concrete Pharmacy.
DIRECTIONS:
Dissolve FLOW Control in the mixing water or add the FLOW Control powder during the initial mixing of your cement product. Use enough FLOW Control to achieve desired properties for your mix. Follow product mixing instructions described on the package of the cement product. Do NOT exceed 4 packets per 50 to 60 lb. bag of Rapid Set. Too much water in the mixture may cause aggregate segregation, which can reduce strengths.
WARNING:
Keep out of reach of children. May cause skin, eye, and lung irritation. Avoid contact with skin, eyes, and clothing. Wear approved protective and safety respiratory equipment. Wash thoroughly after handling. Do NOT TAKE INTERNALLY. In case of contact, flush affected areas with water for 15 to 20 minutes. If inhalation effects occur, remove to fresh air. If irritation persists, seek medical attention. Wash contaminated clothing. Refer to Material Safety Data Sheet for more information.